Ultimate Weld Bead Cleaner for Mold, Paint, and Rust Removal

• Customization: Available
• After-sales Service: Two Years
• Power: 200W/300W
• Model NO.: LCP-100W/200W/300W
• Control Type: Handheld
• Warranty: 2 Years
• Average Laser Power: 200W/300W
• Laser Centre Wavelength: 1064nm
• Cooling Method: Air-Cooled
• Fibre Length: 5m
• Utility Frequency: 50 Hz
• Supply Voltage: AC220V±10%
• Supply Air Pressure: 0.4 MPa Clean Compressed Air, Free of Water and Oi
• Transport Package: Wooden Box
• Specification: L783xW300xH784mm
• Trademark: /
• Origin: China
• HS Code: 845611009
• Production Capacity: 10sets/Month
• Package Size: 119.00cm * 56.00cm * 110.00cm
• Package Gross Weight: 135.000kg

Product Description

Product Description

Laser Cleaning Machines: Laser cleaning technology is a new - generation high - tech solution for surface cleaning.  Laser cleaning machines of this kind can be used to clean mold, paint, rust, and other contaminants on the surface of weld beads without the need for chemical reagents, media, water, or dust.  They feature non - contact cleaning, auto - focusing, and high surface cleanliness.  They are suitable for cleaning various materials and surfaces, including curved surfaces.  For example, the CK - FC - 500W laser rust removal system is a 500 - watt laser cleaning machine that can clean welding beads, paint, and rust.  It has the advantages of easy operation, no - contact cleaning, and no damage to the base material.
Chemical Cleaning Agents: There are also some chemical - based weld bead cleaners.  These cleaners usually contain special chemical ingredients that can effectively dissolve and remove mold, paint, and rust.  They are easy to use, and you just need to apply the cleaner to the surface of the weld bead and let it work for a period of time, then wipe or rinse it off.  However, when using chemical cleaning agents, it is necessary to pay attention to safety, wear appropriate protective equipment, and follow the operating instructions to avoid potential harm to the human body and the environment.
Mechanical Cleaning Tools: Some mechanical cleaning tools, such as high - pressure water jet cleaning equipment or sandblasting equipment, can also be used to clean weld beads.  High - pressure water jet cleaning uses high - pressure water jets to impact the surface of weld beads to remove mold, paint, and rust.  Sandblasting equipment, on the other hand, uses compressed air to spray abrasive particles onto the surface of weld beads to achieve a cleaning effect.  These mechanical cleaning methods are relatively efficient but may require additional equipment and professional operation.

When choosing an "Ultimate Weld Bead Cleaner for Mold, Paint, and Rust Removal", you need to consider factors such as the specific cleaning requirements, the material of the weld bead, the working environment, and the cost - effectiveness to select the most suitable cleaning method or product.
 

Model	LCP-100W	LCP-200W/300W	LCP-500W/1000W
Average laser power	100W	200W/300W	500W/1000W
Laser centre wavelength	1064nm	1064nm	1064nm
Scanning width	Length:Adjustable from 5mm to 150mm	Length:Adjustable from 5mm to 150mm	Length:Adjustable from 5mm to 150mm
	Width:Adjustable from 5mm to 150mm	Width:Adjustable from 5mm to 150mm	Width:Adjustable from 5mm to 150mm
Cooling method	Air-cooled	Air-cooled	Water-cooled
Fibre length	5m	5m	10m
Cleaning head weight	Approximately 1.3kg	Approximately 1.3kg	Approximately 2kg
Net weight of the whole machine	Approximately 22kg	Approximately 32kg	Approximately 180kg
Chassis Size	L603xW258xH481mm	L783xW300xH784mm	L913xW573xH881mm
Supply Voltage	AC220V±10%	AC220V±10%	AC220V±10%
Utility frequency	50 Hz	50 Hz	50 Hz
Power consumption@25ºC	<500W	<1000W@CW-H-200W	<4000W@CW-H-500W
		<1500W@CW-H-300W	<6000W@CW-H-1000W
Supply air pressure	0.4 MPa clean compressed air, free of water and oil	0.4 MPa clean compressed air, free of water and oil	0.4 MPa clean compressed air, free of water and oil

Application

 

Our Advantages

 

Basic Info